Add Wish List Choose Options APR Snub Mount Upgrade - Audi A4 B5 APR's Snub Mount Upgrade replaces the front engine mount on the car. This mount enhances upshifting and downshifting, reduces driveline shock and helps power transfer by taking up excess drivetrain slack. MSRP: £55.87 Choose Options Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Front Engine Mount (Competition Version) 1 As VAG940M except approximately 3 times as stiff - for competition use where loads are higher and comfort is low priority! Can be used for all engine variants in MkIII/Corrado. Replaces OEM part number:- IH0199609 (B,G,E,F,H&J), 1H0199609(K&D), 357199609 MSRP: £194.06 £174.66 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Neuspeed Engine Torque Arm Insert 2009-> Cars inc Mk6 GTI (2) Neuspeed Engine Torque Arm Insert 2009-> Cars inc Mk6 GTI Under hard acceleration, your entire engine and transmission actually rotates due to compliance in the factory bushings. While the soft factory bushings do a good job of damping engine... (2) MSRP: £42.68 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Neuspeed Engine Torque Arm Insert Mk5 etc Neuspeed Engine Torque Arm Insert Mk5 etc Under hard acceleration, your entire engine and transmission actually rotates due to compliance in the factory bushings. While the soft factory bushings do a good job of damping engine vibration, they can also... MSRP: £42.68 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Neuspeed Torque Link (Dogbone) Engine Mount, Rear Bush Neuspeed Torque Link (Dogbone) Engine Mount, Rear Bush Under hard acceleration, your entire engine and transmission actually rotates due to compliance in the factory bushings. While the soft factory bushings do a good job of damping engine vibration,... MSRP: £30.47 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Neuspeed Audi A4 1.8T/2.0T Engine Torque Damper Bushing Neuspeed Audi A4 1.8T/2.0T Engine Torque Damper Bushing Launching your car at full throttle from a standing start will usually result in an annoying "clunk"followed by a slight vibration. This is caused by excessive engine and drivetrain movement... MSRP: £30.47 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Lower Engine Mount (Dogbone) Rear Bushing (Road Version) These inserts are a direct motorsport replacement for the original soft rubbers. To get the ultimate in performance and durability we include the unique feature of bonding the insulator to a billet aluminium support plate. We also include adjustment... MSRP: £74.16 £66.74 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Right Hand Rear Engine Mount (Road Version) 1 This RH rear mounting carries a proportion of the powertrain weight and reacts fore-aft and lateral forces. By combining stiffness fore-aft and laterally with some compliance vertically we are able to reduce the engine movement and still retain noise and... MSRP: £170.54 £153.49 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Front Engine Mount For 4 Cylinder Engines (Road Version) The Golf front mount reacts a large proportion of the accelaration and overrun torque and has to carry a proportion of the powertrain weight. The original VW mount was always going to be a compromise! This Vibra-Technics design is a direct replacement... MSRP: £184.82 £166.34 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Right Hand Rear Engine Mount (Road Version) This RH rear mounting carries a proportion of the powertrain weight and reacts fore-aft and lateral forces. By combining stiffness fore-aft and laterally with some compliance vertically we are able to reduce the engine movement and still retain noise and... MSRP: £97.39 £87.65 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Right Hand Rear Engine Mount (Competition Version) As VAG885M except approximately twice the stiffness - for competition use where loads are higher and comfort is a low priority! Replaces OEM part number:- 357199262, 1H0199262 (A,D,F,&K) MSRP: £115.09 £103.58 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Front Engine Mount (Competition Version) As VAG750M except this is approximately 3 times stiffer - for competition use where loads are higher and comfort is a low priority! Replaces OEM mount:- 191199279C, 357199279C, 1GD199279A MSRP: £194.06 £174.66 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Front Engine Mount For 8V & 16V (Road Version) The Golf front mount reacts a large proportion of the accelaration and overrun torque and has to carry a proportion of the powertrain weight. The original VW mount was always going to be a compromise! This Vibra-Technics design is a direct replacement... MSRP: £184.82 £166.34 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Right Hand Engine Mount for 2.0T Engines (Road Version) Direct replacement for original mounting - including mounting for emmisions canistor. Reduces engine movement in all directions. It also gives vastly superior comfort and isolation from engine vibration over inferior aftermarket urethane mounts. Replaces... MSRP: £261.01 £234.91 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Right Hand Engine Mount For 3.2 Engines (Road Version) Direct replacement for the OE mount. This uprated competition mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also gives vastly superior comfort and isolation from engine... MSRP: £326.27 £293.64 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Left Hand Engine Mount For 1.8T, 2.8 & 3.2 Engines (Road Version) (2) Direct replacement for the OE mount. This uprated mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also gives vastly superior comfort and isolation from engine vibration over... (2) MSRP: £149.69 £134.72 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Right Hand Engine Mount For 2.8 & 3.2 Engines (Road Version) Direct replacement for the OE mount. This uprated mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also gives vastly superior comfort and isolation from engine vibration over... MSRP: £326.27 £293.64 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added Vibra-Technics Right Hand Engine Mount For 1.8T Engines (Road Version) (2) Direct replacement for the OE mount. This uprated mount will reduce engine movement in all directions - giving less stress on exhaust etc and giving the car a tighter feel. It also gives vastly superior comfort and isolation from engine vibration over... (2) MSRP: £167.71 £150.94 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added ECS Dogbone Mount Insert Kit GO5/Eos/A3/Jet/PasB6/Leo2/Oct2 ECS Dogbone Mount Insert Kit GO5/Eos/A3/Jet/PasB6/Leo2/Oct2 Fits early models up to 2008 ECS Tuning is proud to release it's dogbone mount insert for the Mk5 platform. The ECS dogbone mount insert works with the OEM rubber bushing to provide a better... MSRP: £74.32 Add to Cart The item has been added Compare
Add Wish List Add to Cart The item has been added ECS Ultimate Torque Link (Dogbone) Mount Kit (5) ECS Ultimate Torque Link (Dogbone) Mount Kit Notes:* This dogbone mount ideally should not be fitted to any Diesel Vehicles. A full replacement torque arm, with the heavy duty bush pre-fitted. These are probably the easiest dogbone mounts to do a DIY fit... (5) MSRP: £165.23 Add to Cart The item has been added Compare