Audi

We've been testing these mounts for some time to ensure they are reliable and meet the criterion for the intended use - results so far are very exciting!WHAT THEY ARE: A new line of rubber motor mounts made FOR us by OE suppliers to OUR specifications...

We've been testing these mounts for some time to ensure they are reliable and meet the criterion for the intended use - results so far are very exciting!WHAT THEY ARE: A new line of rubber motor mounts made FOR us by OE suppliers to OUR specifications...

The 034Motorsport Snub Mount With Bracket is designed to replace the factory, worn snub mount and bracket. With a tight tolerance design allowing less than 2-3mm of movement, the 034Motorsport Snub Mount with Bracket greatly reduces the movement of the...

The 034Motorsport Snub Mount With Bracket is designed to replace the factory, worn snub mount and bracket. With a tight tolerance design allowing less than 2-3mm of movement, the 034Motorsport Snub Mount with Bracket greatly reduces the movement of the...

The dust boots found on the center driveshaft support bearing on B7 Audi RS4s can often crack and tear after years of use. The 034Motorsport replacement boot is an OEM-Like replacement that perfectly seals the support bearing from dust or grime. FEATURES...

The Gen 1 & Gen 1.5 Audi R8 uses rubber front differential mounts which deflect under load, causing the delay of power transfer to the front tires, as well as leading to less-than-optimal handling characteristics during on-throttle and off-throttle...

Our STREETDENSITY Mounts are solid rubber mounts with a 50 durometer that are about 10% stiffer than stock. This means they still ride smooth and quiet but provide a marked improvement in drivetrain dampening over stock mounts. Livable street performance...

Replace your fixed, cast aluminum factory rear toe links on your Gen 1 & Gen 1.5 Audi R8 with this performance engineered adjustable set from 034Motorsport! 034Motorsport's Motorsport Adjustable Rear Toe Links facilitate simple and precise toe...

034Motorsport is pleased to offer this all-new Spherical Adjustable Rear Tie Rod Set for the B4/B5 Audi A4/S4/RS4 & 80/90/RS2! These toe links allow for precise toe adjustment of the rear suspension, while eliminating any unwanted suspension...

Replace your flimsy, imprecise OEM sway bar end links with 034Motorsport performance engineered adjustable spherical end links! The 034Motorsport's Billet Adjustable Rear Sway Bar End Links allow for uncompromised transfer of suspension energy and...

Replace your flimsy, imprecise OEM sway bar end links with 034Motorsport performance engineered adjustable spherical end links! The 034Motorsport's Billet Adjustable Front Sway Bar End Links allow for uncompromised transfer of suspension energy and...

034Motorsport is proud to offer our Motorsport Adjustable Front Sway Bar End Link Pair for the B9 Audi A4/S4, A5/S5/RS5, and Allroad! These end links are manufactured from billet aluminum and feature Aurora sphercial bearings, and are designed to replace...

The 034Motorsport Camber Shim Kit for Audi Gen 1 & 1.5 R8 allows for the easy addition of negative camber to your vehicle. Designed to be a modular upgrade, each shim adds to the maximum camber range adjustable by spacing out the lower control arm in...

The 034Motorsport Camber Shim Kit for Audi Gen 1 & 1.5 R8 allows for the easy addition of negative camber to your vehicle. Designed to be a modular upgrade, each shim adds to the maximum camber range adjustable by spacing out the lower control arm in...

The 034Motorsport Camber Shim Kit for Audi Gen 1 & 1.5 R8 allows for the easy addition of negative camber to your vehicle. Designed to be a modular upgrade, each shim adds to the maximum camber range adjustable by spacing out the lower control arm in...

This hardware kit contains all hardware required to install a lower front control arm kit for early model B8/C7 vehicles with M12 hardware. All hardware is high-quality OEM plated.   FITMENT: 2009 - 2011 Audi A4 (B8) 2010 - 2011 Audi S4 (B8) 2008 -...

This hardware kit contains all hardware required to install a lower front control arm kit for late model B8.5/C7.5 vehicles with M14 hardware. All hardware is high-quality OEM plated.   FITMENT: 2012 - 2016 Audi A4 (B8/B8.5) 2012 - 2017 Audi S4...

This hardware kit contains all hardware required to install an upper front control arm kit. All hardware is high-quality OEM plated.   FITMENT: 2009 - 2016 Audi A4 (B8/B8.5) 2010 - 2017 Audi S4 (B8/B8.5) 2008 - 2017 Audi A5 (B8/B8.5) 2008 - 2017...