Maintenance / Tools

Kit includes:   Counterhold tool  Tensioning pins   Turning over tool  Knurled nut Keep everything in time while performing a chain service or replacing the crankshaft pulley. Previous Revisions ...

This inclusive kit from Schwaben includes the recommended tools necessary to correctly complete the timing sevice on VW/Audi '09 & up models with 2.0L turbo engines. This Schwaben kit contains the...

This is the proper tool for aligning the interior shifter into the "home" position for accurately adjusting the shift cables so you can get into each gear smoothly. VW T10027A Cross Reference ...

The Schwaben 13-piece alternator tool kit removes and installs Overrunning Alternator Decouplers (OADs) on most alternators. Unlike solid drive pulleys, OADs have an internal overunning clutch, and...

This tool slides into the bell housing and counterholds the teeth on the flywheel to keep it from rotating allowing for easier flywheel bolt removal .  Cross Reference VAS 3067  

Tool recommended by VW/Audi too install your rear crankshaft seal in your engine. Cross Reference T20097

The OEM VW/Audi plastic drain plug can be easily stripped or difficult to remove if using the incorrect tool.  Do it right with the right tools. Using the Schwaben Drain Plug Tool makes removal and...

The Schwaben large capacity oil drain catch can lets you perform a mess-free oil change and dispose of your drain oil responsibly. The rugged ABS container has a generous 10 liter (10,000 mL, more...

The Schwaben standard capacity oil drain catch can lets you perform a mess-free oil change and dispose of your drain oil responsibly. The rugged ABS container has a six litre capacity, large enough...

This complete set of extra deep sockets work great on cars equipped with extended studs. They also work as a long wheel nut socket for those deeply recessed nuts in wheels. This set comes with a...

Protect your expensive mag wheels with Schwaben six-point, deep-well impact sockets. Schwaben Protecta Sockets have color coded mar-free exterior sleeve  that prevent nicks and scratches left by...

This Schwaben Exhaust pipe cutter is designed to cut a full 360 degree's around the pipe in very tight spaces. Cuts pipes 3/4” to 3” (19 to 76mm) in diameter. 15 blades effectively cut pipe so only...

This hand held Schwaben tool makes changing fluids an easy, quick task. Suitable for oils, water and any non corrosive liquid. Ideal for extracting and replacing Power steering fluid, Differential...

11-Piece Trim Tool kit is designed for removal of door panels, fascia and trim strips, dashboards, and interior panels and window mouldings. Made of impact resistant plastic that will not mar...

Longer, lighter and easier to use, our aluminum wheel hanger makes it easy to remove and install wheels. Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate...

Many German suspensions hold the strut in a split housing that is clamped tightly around the strut tube with a pinch bolt. Efforts to spread the housing after removing the bolt using chisels or pry...

Conventional piston retraction/pad spreader tools use a simple screw function to press pistons back into the caliper housing. These are simple tools that function well for old-style single-piston...

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded...

The Schwaben 11-piece Caliper Piston Retractor tool kit screws brake caliper pistons back into their bores to make room for new brake pads. An essential tool for working on calipers with threaded...