Coilover Kits

Bilstein Service Parts - Front Strut Top Mount Kit for PQ34 Platform and some PQ25 Platform Vehicles Any shock absorber is only as good as the equipment around it. So when youre replacing shock absorbers or springs, make sure you have the right service...

Conditions see certificates; Threaded Suspension (height adjustable); Built-in adjustable; Lowering ca. [mm]: 30-45 mm; Axle load [kg] to 950 kg; Lowering ca. [mm]: 5-20 mm; Axle load [kg] to 775 kg Bilstein B16 PSS9/10 Hieght & 9-Way Damping...

Conditions see certificates; Threaded Suspension (height adjustable); Lowering ca. [mm]: 30-45 mm; Axle load [kg] to 950 kg; Lowering ca. [mm]: 5-20 mm; Axle load [kg] to 775 kg Bilstein B14 (PSS) suspension kits feature ride height adjustability in an...

Lowering Front - 15-50mmLowering Rear - 15-50mmNotes: Including SportbackST Suspension ST X Coilovers - Ride Height & Rebound Adjustable CoiloversFront & rear axle weights can be found on the VIN plate which is normally found under the bonnet on...

KW Variant 2 Coilovers- Stainless Steel Ride Height and Rebound Damping Adjustable Lowering Front - 15-50mmLowering Rear - 15-50mmNotes: Including SportbackFront & rear axle weights can be found on the VIN plate which is normally found under the...

Lowering Levels:Front - 15-50mmRear - 15-50mm Front & rear axle weights can be found on the VIN plate which is normally found under the bonnet on one of the inner wings or behind the passenger door on the b-pillar. It will look like this: For...

KW Street Comfort Coilovers - Audi A1 (8X) Inc SportbackHatch Lowering Levels: Front: 15-40mmRear: 15-40mm Sportback Lowering Levels: Front: 15-40mmRear: 20-40mm Front & rear axle weights can be found on the VIN plate which is normally found under...

KW Variant 1 Coilovers- Stainless Steel Ride Height Adjustable Lowering Front - 15-50mmLowering Rear - 15-50mmNotes: Including SportbackFront & rear axle weights can be found on the VIN plate which is normally found under the bonnet on one of the...

KW Clubsport Coilovers - Audi A1 (8X) - 2 Way with Top Mounts Lowering Levels: Front: 15-50mmRear: 15-50mmThe racing program KW Competition has been designed for national and international motor sports. Today, KW Competition is used by various racing...

Lowering Front - 15-50mmLowering Rear - 15-50mmNotes: Including SportbackST Suspension ST XA Coilovers - Ride Height & Rebound Adjustable with Adjustable Front Top MountsFront & rear axle weights can be found on the VIN plate which is normally found...

Lowering Front - 15-50mmLowering Rear - 15-50mmNotes: Including SportbackST Suspension ST X Coilovers - Ride Height AdjustableFront & rear axle weights can be found on the VIN plate which is normally found under the bonnet on one of the inner wings...

Height and Damping Adjustable: Combining on-vehicle adjustment of both height and damping, this kit gives improved control over factory-set V-Maxx kits whilst still allowing easy height adjustment for that perfect vehicle stance. Damping ranges from...

Height Adjustable: With on-vehicle ride height adjustment and factory-set damping, the ride height can be easily adjusted allowing you toachieve the ultimate stance. Damping is preset by V-Maxx to give the best balance between sporty handling and ride...

ap Coilover kit to suit the Audi A1 (8X) 08/2010+- High Quality Coilover kit at a reasonable price- Individual adjustment of the height within the TuV range- High Quality components and (German) TuV Certificate- Front lowering: 30-60mm- Rear Lowering:...

If the vehicle has DCC / DDC / EDC fitted, You will need to buy an additional ‘Cancellation Kit' H&R Monotube Coilover Kit - A1 - Typ 8X - 2010>Lowering Front mm 30-50Lowering Rear mm 30-50H&R is the pioneer in coil over suspensions with TUV approval:...