Verkline Bump-Steer Kit Front Track Rod End - PQ35/MQB

For anyone who likes to be sporty, toe-in adjustment is one of the most important factors in the chassis area. In order to control this throughout the travel range, it is important to measure and adjust the bump steer settings if necessary - especially if you have changed the ride height or other suspension settings.

With the Verkline steering rod ends, the front bump steer (steering behavior on uneven ground) can be adjusted by moving the ball head up or down with the spacers provided (see picture). In total there are 6mm spacers, all of which should always be used. To replicate the original geometry, the spacers should be placed 2mm below the ball head and 4mm above. If you want to change the steering behavior you can simply move some of the spacers from bottom to top or vice versa.

MEASUREMENTS

Delivery:
- 2x aluminum tie rod ends (left and right)
- mounting material
- 2x high strength pins.
- Spacers to adjust
- 2x high-quality motorsport uniballs made of PTFE
- Installation Guide